Motion detector as a System on Module
AUTOLIGHT nova is a SMD module integrating a HF motion detector with a Bluetooth chip and an intuitive App. With the motion detector, a daylight sensor, a Bluetooth mesh based communication processor, a luminaire controller and different control interfaces it combines all functions for a new cost efficient product strategy and integration into a LED board or into a LED driver.
one sensor. all applications.
Parking | Staircases & Floors | Urban outdoor | High-bay | Workplaces & Offices | Streetlight
Key Facts
AUTOLIGHT nova SoM
Interface:
• DALI (3.3 V signals)
• 4 x PWM / on-off (3.3 V signals)
• Power supply 7..24 V DC
Compatibility:
• Depending on LED board
Detection range:
• Frontal 15 m
• At 2.6 m height, radius 5 m
Size:
• SoM 23 x 33 x 3 mm
• 10 solder pads
• Optional SMD connector
AUTOLIGHT nova DALI
Interface:
• DALI-2 / D4i compliant
• Bus powered device Type D
Compatibility:
• DALI drivers with integrated bus power supply (D4i, DEXAL, SR, …)
Detection range:
• Frontal 15 m
• At 2.6 m height, radius 5 m
Casing:
• 52 x 30 x 14 mm
• 2-pin terminal (DALI)
AUTOLIGHT nova ON/OFF
Interface:
• Uin 12..60 V DC
• Uout 1 (opt. 2) channel on/off
• Max. 2 A
Compatibility:
• Constant current SELV drivers and LED boards
• Driver must allow secondary switching
Detection range:
• Frontal 15 m
• At 2.6 m height, radius 5 m
Casing:
• 52 x 30 x 14 mm
• 2-pin terminal (Uin)
• 3-pin terminal (Uout 2 channel)
AUTOLIGHT nova PWM
Interface:
• Uin 12..24 V DC
• Uout 2 channel PWM
• Max. 5 A
Compatibility:
• Constant voltage drivers and LED boards 12 V or 24 V
Detection range:
• Frontal 15 m
• At 2.6 m height, radius 5 m
Casing:
• 52 x 30 x 14 mm
• 2-pin terminal (Uin)
• 3-pin terminal (Uout 2 channel)
Bluetooth mesh is used to integrate the luminaire into a Bluetooth SIG compatible mesh network. This mesh network is the backbone of the luminaire control system, providing comfortable control functions like grouping, sensor- and manually controlled lighting programs or scenes. The mesh network can integrate MICAS products and compatible 3rd party components, even in large industrial installations.
Bluetooth is also the interface for configuration of the sensor via App. There is no need to open the luminaire for configuration.
App Functions