Lighting Solutions
Our Lighting Solutions encompass a broad range of products, from high-frequency motion detectors to light sensors and wireless systems for interior and exterior use. The compact, innovative and high-quality MICAS installation modules for lighting allows users to set light duration, range and other parameters to suit their individual requirements.
Alongside our universal products, more challenging sensor solutions for networking individual lamps or entire installations are increasingly in demand. The keywords here are building automation and energy efficiency. For this reason, we specialise in intelligent, networked Bluetooth communication and module control as well as configuration via app.
Our SMART series lighting products are therefore equipped with Bluetooth mesh technology. The Bluetooth itself performs multiple functions: the mesh technology provides the platform for wireless networking of lights, enabling lights to be linked flexibly in groups using sensors. At the same time product installation and servicing is supported by a smartphone app, which requires no gateway or internet connection.
Where necessary a gateway can be used to connect lighting installations to building management systems or cloud solutions. This opens up a wide range of potential applications. Service personnel can be optimally deployed in line with actual need, intelligent energy-saving models can be implemented and product functions activated via the upload facility.
Products Lighting Solutions
AUTOLIGHT SMART DALI
AUTOLIGHT SMART DALI
Super small & smart Bluetooth sensor gateway with integrated HF sensor, with mesh network, DALI interface and App
Characteristics
- Small and compact
- Wireless communication over mesh network via Bluetooth
- Configuration via App on tablet or smartphone (available for iOS and Android)
- Daylight sensor
AUTOLIGHT SMART ON/OFF
AUTOLIGHT SMART ON/OFF
HF motion detector equipped with a ON/OFF interface which allows to switch up to 4 drivers (depending on inrush current).
Characteristics
- Small and compact
- Two possible mounting positions (on ground plate or behind LED panel)
- Wireless communication over mesh network via Bluetooth
- Configuration via App on tablet or smartphone (available for iOS)
- Relay interface
- Daylight sensor
AUTOLIGHT XS
AUTOLIGHT XS
Particularly small 5.8 GHz HF motion detector for switching of luminaires with any kind of illuminants in a very energy efficient way, suitable for price sensitive luminaires with lower electric loads
Characteristics
- Compact-sized and small casing
- Simple settings via potentiometer
- Integrated test mode
- Implemented immunity against other sensors in the same detection field
- Master/Master and Master/Slave installations according to max. switching capacity
AUTOLIGHT xs comfort V2
AUTOLIGHT xs comfort V2
HF motion detector with set-up mode for a glare-free installation (in luminaires)
Characteristics
- Particulary suitable for professional use with moderate electric loads
- Compact-sized and small casing
- Simple settings via push-buttons with LED-feedback
- Program mode for setting of individual brightness thresholds
- Integrated test mode
- Implemented immunity against other sensors in the same detection field
- Master/Master and Master/Slave installations according to max. switching capacity
AUTOLIGHT SMART DALI
Super small & smart Bluetooth sensor gateway with integrated HF sensor, with mesh network, DALI interface and App
Characteristics
- Small and compact
- Wireless communication over mesh network via Bluetooth
- Configuration via App on tablet or smartphone (available for iOS and Android)
- Daylight sensor
AUTOLIGHT SMART ON/OFF
HF motion detector equipped with a ON/OFF interface which allows to switch up to 4 drivers (depending on inrush current).
Characteristics
- Small and compact
- Two possible mounting positions (on ground plate or behind LED panel)
- Wireless communication over mesh network via Bluetooth
- Configuration via App on tablet or smartphone (available for iOS)
- Relay interface
- Daylight sensor
AUTOLIGHT XS
Particularly small 5.8 GHz HF motion detector for switching of luminaires with any kind of illuminants in a very energy efficient way, suitable for price sensitive luminaires with lower electric loads
Characteristics
- Compact-sized and small casing
- Simple settings via potentiometer
- Integrated test mode
- Implemented immunity against other sensors in the same detection field
- Master/Master and Master/Slave installations according to max. switching capacity
AUTOLIGHT xs comfort V2
HF motion detector with set-up mode for a glare-free installation (in luminaires)
Characteristics
- Particulary suitable for professional use with moderate electric loads
- Compact-sized and small casing
- Simple settings via push-buttons with LED-feedback
- Program mode for setting of individual brightness thresholds
- Integrated test mode
- Implemented immunity against other sensors in the same detection field
- Master/Master and Master/Slave installations according to max. switching capacity
AUTOLIGHT plus V2
AUTOLIGHT plus V2
HF motion detector for luminaires, especially suitable for the switching of luminaires with high electric loads
Characteristics
- Particulary suitable for professional use with higher electric loads
- Implemented immunity against other sensors in the same detection field
- Simple settings in predefined steps via push-buttons
- Program mode for setting of individual brightness thresholds
- Master/Master and Master/Slave installations according to max. switching capacity
AUTOLIGHT flex 1 – 10 V
AUTOLIGHT flex 1 – 10 V
5.8 GHz HF motion detector with 1-10 V interface and high inrush relay for switching and dimming of luminaires with any kind of illuminants in a very energy efficient way
Characteristics
- Particulary suitable for professional use with higher electric loads
- Implemented immunity against other sensors in the same detection field
- Simple settings in predefined steps via push-buttons
- Predefined DIM programs for the usage in corridors, staircases etc
AUTOLIGHT I²C
AUTOLIGHT 868/868 staircase/915
AUTOLIGHT 868/868 staircase/915
Innovative and very compact-sized radio module to connect several luminaires in a wireless way
Characteristics
- Repeater mode to forward the radio signal and to increase the range
- Very simple creation of groups via DIP-switch-coding, up to 32 different groups possible
- Very compact-sized casing for hidden installation
- Relay with a good price-performance ratio
AUTOLIGHT plus V2
HF motion detector for luminaires, especially suitable for the switching of luminaires with high electric loads
Characteristics
- Particulary suitable for professional use with higher electric loads
- Implemented immunity against other sensors in the same detection field
- Simple settings in predefined steps via push-buttons
- Program mode for setting of individual brightness thresholds
- Master/Master and Master/Slave installations according to max. switching capacity
AUTOLIGHT flex 1 – 10 V
5.8 GHz HF motion detector with 1-10 V interface and high inrush relay for switching and dimming of luminaires with any kind of illuminants in a very energy efficient way
Characteristics
- Particulary suitable for professional use with higher electric loads
- Implemented immunity against other sensors in the same detection field
- Simple settings in predefined steps via push-buttons
- Predefined DIM programs for the usage in corridors, staircases etc
AUTOLIGHT 868/868 staircase/915
Innovative and very compact-sized radio module to connect several luminaires in a wireless way
Characteristics
- Repeater mode to forward the radio signal and to increase the range
- Very simple creation of groups via DIP-switch-coding, up to 32 different groups possible
- Very compact-sized casing for hidden installation
- Relay with a good price-performance ratio
TWILIGHT/TWILIGHT eLUX
TWILIGHT/TWILIGHT eLUX
Flat plug & play sensor module for switching of AC LED’s, for a daylight dependency switch of luminaires
Characteristics
- Needs no settings
- Senor system controls directly 230 V AC LEDs, no electronic ballast necessary
- Installation of the sensor module directly inside the luminaire
- Light thresholds are already implemented in the system
- Optional with external sensor available
TWILIGHT/TWILIGHT eLUX
Flat plug & play sensor module for switching of AC LED’s, for a daylight dependency switch of luminaires
Characteristics
- Needs no settings
- Senor system controls directly 230 V AC LEDs, no electronic ballast necessary
- Installation of the sensor module directly inside the luminaire
- Light thresholds are already implemented in the system
- Optional with external sensor available